How to connect the water pipe head in the wall

https://www.zincheng.com.tw/he66.htm

Water pipe is also a relatively important material in our lives. Many friends will make the water pipe head in their daily life, but because they do n’t know the relevant steps, they will be confused during construction. I do n’t know how. To solve it, let's find out how to connect the water pipe head in the wall today? What is the solution for leaking water pipes? Let's take a look at related knowledge together, I hope it can help everyone. How to connect the water pipe head in the wall First use a saw blade to saw the faucet broken in the wall three or four to the groove, and then knock him out with a screwdriver, and it is ok. But I want to remind you that when you use a saw, you must be careful not to hurt the screw in the water pipe. When I saw, I saw a slot on each of the top, bottom, left, and right, and wound the silk pattern on the left a little. It didn't matter if I wrapped the PTFE tape. What is the solution to leaking water pipes First, the classification and characteristics of water pipes 1. Galvanized pipe: The water pipe in the home may be made of this material when it is handed over. It can not only be buried, but also easily leak, and it is also easy to corrode and cause heavy metals in the water to exceed the standard. Replace it directly. Copper pipe: It is a relatively good traditional water pipe, which is resistant to corrosion. If it is connected with ordinary pipe fittings for a long time, there will also be leakage problems. If welding is used, it will be much safer, but it is still not buried in the wall. Copper pipes are very expensive. And as a strategic reserve metal, copper is so wasteful for civilian use. 2. Aluminum-plastic pipe: It used to be popular and easy to construct, but its weak current is easy to leak when used as a hot water pipe. PPR pipe: The current comparison of water pipes, non-toxic, corrosion-resistant, hot-melt seamless connection, can be used for hot and cold water pipes, can also be buried. Second, several small ways to repair water leaks 1. You can first cut off the water source, then remove the male and female nuts connected to the compression joint, wrap the thread with several layers of thread sealing tape, and then reinstall the joint. 2. If the sleeve joint leaks water, it may be necessary to remove the joint and reinstall many water pipes, so the repairman should be notified in time for repair. No matter what kind of water pipe joints are leaking, you can first use the special tape to repair the water pipe for temporary repair. The specific operation method is: first close the valve and cut off the water source, then open the faucet to an appropriate position to release most of the pressure in the water pipe, and then use a special tape to bind the leaking part, or seal it with an epoxy resin adhesive live. All the knowledge about how the water pipe head is connected in the wall and what is the solution to the water leak in the pipe is hoped to help everyone. Water pipes are also more important in our lives, so both the quality of water pipes and the installation of water pipes are very important, otherwise some troubles will easily occur.